- Battery Settings
- WiFi scan throttling (Android 10 and onwards)
- Enabling Wifi & Bluetooth scanning
- Clearing your app’s cache
- High Accuracy GPS
Battery Settings #
If your app implements a tracking use case, it will probably need to run for hours in the background. However, by default Android may prevent apps to run for long periods of time in order to save battery. You may disable this Android feature by:
- Disabling the Power Saver mode in your smartphone.
- Disabling the battery optimization feature for your app.
Disable Power Saver Mode #
You may disable the Power Saver mode in Settings> Battery> Power Saver > Disable. The specific route may vary depending on the Android version.
Disable Battery Optimization for your app #
In addition, You will need to deactivate the battery optimization option for your app. This action can be performed by choosing Apps on the Settings menu and looking for either Situm Mapping Tool or Situm MRM Tracker in the settings search engine.
Then, in the configuration of your App, select the option Battery and configured it as Unrestricted.
WiFi scan throttling (Android 10 and onwards) #
Disabling WiFi Throttling from the Developer options #
One way to disable WiFi Throttling is through the Android Developer Options. First of all, you must turn on these options by going to Settings > About Phone. Then, tap on the menu called “Build Number” 7 times until a pop-up message indicates that the “Developer mode has been enabled”.
Then, go back to Settings and access the Developer Options that have been enabled. On Networking, deactivate the WiFi scan throttling.
Disabling WiFi Throttling with ADB #
As an alternative to the previous process, you may also disable WiFi Throttling in your device by using ADB. First of all, you should install and get ADB running on your computer. Then, connect your smartphone to your computer via USB and introduce the following command in your favorite console:
adb shell settings put global wifi_scan_throttle_enabled
Enabling Wifi & Bluetooth scanning #
In order to scan WiFi and BLE signals correctly, you must allow scanning WiFi networks and Bluetooth beacons in Settings > Location > Location Services and activate Wifi & Bluetooth scanning.
Clearing your app’s cache #
Sometimes, the data in your cache may become corrupt and you may want to clear it. You may do this from your App info (name may vary across Android versions). Hold down your app icon (Situm Mapping Tool App in this example) and click on Storage and then Clear data and Clear cache.
Finally, login into your app again.
Enabling the unrestricted data usage and background data usage #
Additionally, we also recommend enabling the following features:
- Background data usage
- Data usage while Data saver is on
You may do this from your App info (name may vary across the different Android versions). Hold down your app icon (Situm Mapping Tool App in this example) and click on Mobile Data. Then, enable Allow background data usage and Allow data usage while Data saver is on.
High Accuracy GPS #
On Android versions >10 the following settings must be configured to improve the GPS signal:
Make sure Google Location Accuracy is on and Wi-Fi scanning and Bluetooth scanning are enabled.